Ask Danny | Ep. 16: Top 5 Simple Solutions for Bathroom Maintenance


This week, Today’s House owner Radio Show co-host Joe Truini features his Leading 5 Simple Solutions for the bathroom.


“Today’s Homeowner” Simple Solution host Joe Truini sprays Rain-X on his shower door to remove unsightly water spots.
A glass cleaner that includes rain repellant will protect against drinking water spots from showing on shower doorways. (3 Echoes Information Studio)

H2o Spot Remover for Shower Doorways

Does your glass shower door have drinking water places? They’re a discomfort to take out, and common cleaners merely just can’t do the task. Properly, here’s a mystery drinking water place remover that you might presently have devoid of acknowledging it!

Nobody wishes to wipe their shower doorway each time just after they use it to reduce h2o spots. And let’s be trustworthy — who has the time for that?

Which is why it allows to have the suitable tool for common upkeep.

I like to use a glass cleaner with a method that contains rain repellant — like this a person. (This is an affiliate hyperlink. If you buy this merchandise, we will earn a compact fee at no additional expense to you.)

This variety of products is ordinarily marketed for cleansing bugs and eliminating h2o spots from vehicle or truck windshields, but that doesn’t mean it only works on these surfaces! So search in the automotive aisle if you can not come across the product close to common cleaners.

Now, why does this product perform above typical family cleaners?

It is because the rain-repellant formulation causes water to bead up and repel off the shower doorway. That indicates your glass shower enclosure will have no h2o places!

Here’s how it is effective: Only spray the cleaner on the glass and use a towel to wipe it off — I constantly use a cotton microfiber towel.

Now you have an uncomplicated h2o location remover! Not only is the glass clean, but it also repels drinking water with no recognizing.

Observe: Effortless Drinking water Place Remover for Your Shower Doorway


Box of baking soda and bottle of white vinegar, seen beside a bathroom sink
Baking soda and vinegar will deodorize and thoroughly clean your sink with no damaging the bathtub fixture. (3 Echoes Content Studio)

How to Clear and Deodorize Bath Sink

It’s not usually you provide baking soda and vinegar into a rest room, but you can use them to thoroughly clean and deodorize a bathroom sink.

Sinks frequently turn out to be slow-draining, and they can get clogged up with soap scum and hair. They will also create a really funky odor, so here’s how to get rid of that.

Start out with one particular-3rd cup of baking soda. You don’t have to be also exact, but you will need to have to just take about a third of a cup or so and dump it in the drain.

Future, acquire one whole cup of vinegar. White vinegar is a definitely powerful cleaning agent that you can use all above the house.

Right after it hits the baking soda, enable it fizz down for a number of minutes. Some folks could possibly use bleach below, but bleach can truly try to eat the finish proper off of some tub fixtures, so you do not want to use it.

After the baking soda and vinegar have calmed down a very little little bit, observe up with a full kettle of warm water. This will, in combination with the vinegar and the baking soda, lower by anything that might be clogging up the sink.

If you do this procedure as soon as a thirty day period, you’ll have a truly sweet-smelling sink and a absolutely free-flowing drain.

Check out: The Easy Way to Clear and Deodorize Your Sink


inside of a toilet tank showing flapper valve
Flappers have two essential employment: They supply a seal for the toilet’s flush valve and manage the volume of water unveiled into the bowl. (3 Echoes Articles Studio)

How to Swap a Rest room Flapper Valve

If you have a bathroom that’s frequently operating, the culprit is very likely a leaky flapper valve. More than time, flapper valves may develop into cracked or warped, which can allow water to leak out.

Here’s how to swap it:

  • Turn the h2o off to your rest room.
  • Flush the drinking water out so the tank is vacant
  • Unhook the previous flapper valve and snap on the new just one.
  • Adjust the chain to make absolutely sure the duration is proper.
  • Transform the water back on and flush the toilet a pair of times to make positive the flapper valve is functioning effectively.

View: How to Exchange Toilet Flapper Valve


A do-it-yourself scrub brush drill attachment chucked into a drill is fantastic for detailing tile floors. (3 Echoes Articles Studio)

How to Ability-Thoroughly clean Bath Tiles

Scrub brushes get the job done very well for cleaning, but they call for a good deal of elbow grease. To transform a standard hand scrub brush into a electricity attachment for your drill:

  1. Slice the take care of off a spherical scrub brush.
  2. Drill a gap in the center of the brush.
  3. Insert a 4-inch extensive equipment bolt in the gap from the bristle aspect.
  4. Set a washer and nut on the back aspect and tighten it up.
  5. Chuck the bolt into a drill.
  6. Run the drill at medium pace when making use of the scrub brush attachment.

View: How to Clean Tiles Faster Than At any time


Using vinegar to clean a clogged showerhead.
Use vinegar and a plastic bag to cleanse a clogged showerhead. (3 Echoes Information Studio)

How to Thoroughly clean a Clogged Showerhead

Showerhead spray nozzles can turn out to be clogged around time with mineral deposits found in faucet h2o.

To thoroughly clean a showerhead so it sprays uniformly:

  • Place a plastic bag filled with white distilled vinegar over the showerhead.
  • Connect a twist tie all-around the showerhead arm to keep the bag in spot.
  • Enable the showerhead to soak in the vinegar for one to two days.
  • Take out the bag and flip the showerhead on full drive.

If the nozzles are even now clogged, repeat the soaking process right up until obvious.

Look at: How to Clear a Clogged Showerhead


Additional Looking through

Leave a Reply